Colour reversing camera as parking aid and for observing rear traffic

CARGUARD 120° van reversing camera fixed 12V

Functional description:

You can upgrade your existing navigation system to a full-fledged reversing video system with our extremely robust and high-quality reversing cameras or opt for a complete package consisting of a navigation system or our 7 inch monitor and a reversing camera of your choice. The camera image is displayed on the screen as soon as reverse gear is engaged.

Device information:

This 120° camera has a high resolution and was specially developed for mounting above the rear doors on vans.
For flat, waterproof mounting on the roof of the vehicle (angled downwards to the rear).
Robust white plastic housing, which is not damaged when screwed on and is therefore strongly protected against corrosion.
Waterproof plug-in connections instead of corrosion-prone cinch connections as with most standard cameras
Use of high-quality Sony CCD electronics
9 infrared LEDs guarantee a very good image even in the dark (night vision up to 10 m)
Light sensitivity 0 Lux
Vibration resistant up to 6G
vibration resistant up to 80G
automatic backlight compensation
Lotus coating
Image type: colour CMOS
resolution: 610,000 pixels
image size: 1/4 inch
Focal length: 2.6mm, F 2.0
Power consumption: < 1.5 W
120° diagonal viewing angle
No power supply required at the rear of the vehicle
Signal-to-noise ratio: > 48 dB with automatic gain control
Power supply: DC 12 V +/- 10%
power consumption: < 1.5 W
Operating temperature range: -30 C° to 70 C°
Standing temperature range: -40 C° to 80 C°