As a parking aid and for observing rear traffic.

CARGUARD Angel View 7" AHD monitor RAV-MO-7HD with 3 camera inputs, set with RAV-M full HD 1080p mini shutter rear view camera from CARGUARD Systems, 130° viewing angle, 9-32V and guidelines.

Function Description:

This extremely robust and high-quality monitor with rubber-coated housing forms a fully-fledged premium reversing video system when set with the shutter-type reversing camera and outstanding full HD image quality.

3 camera inputs ensure that you always have everything in view and safety is guaranteed. The 3 trigger inputs allow the cameras to be switched on via different triggers, with reversing visibility always taking priority. Thanks to the built-in loudspeaker, this monitor can reproduce the sounds around the camera in the driver's cab, e.g. during briefing.

The camera is only 78 mm wide and probably the smallest shutter camera on the market. The ingenious design allows any installation position: overhead on the ceiling, on the wall or on the floor. The camera connection cable can be installed invisibly and absolutely waterproof. The protective flap prevents contamination.

Device information Camera:

\t
• Outstanding resolution: 2,080,000 pixels with 1080 TV lines.
\t
• Power supply: DC 9-32V +/- 10%
\t \t
• Lens coverage: 58° (vertical) / 109° (horizontal) 130° (diagonal)
\t
• Designed to meet IP69K, the highest protection standard for automotive components
\t
• Protection against water from high-pressure cleaners
\t
• Protection against permanent submersion
\t
• Protection against foreign bodies: absolutely dust-tight
\t
• Protection against contact and vibrations
\t
• The powder-coated silver die-cast aluminium housing is additionally protected by a corrosion-free sunshield, a motorised closing flap and a 2 mm thick, torsion-resistant stainless steel mounting foot
\t
• extremely resistant to branches, high-pressure cleaners, storms, dirt, winter weather and rain
\t
• waterproof screw connections
\t
• Protective shutdown in case of blockage by foreign objects
\t
• Image sensor size 700 TVL 1/3 inch Sharp CCD model RJ2341BA0PB
\t
• Image sensor size 1080p 1/2.9 inch Sony CMOS
\t
• Fast real-time image transmission
\t
• 6 infrared LEDs of highest quality guarantee a very good image even in darkness
\t
• Night vision up to 12 m
\t
• Light sensitivity: 0 lux (with IR at night), 0.1 lux (during the day)
\t
• vibration resistant up to 5G (700TVL) / up to 10G (1080p)
\t
• shockproof up to 80G
\t
• built-in microphone
\t
• heating against condensation: active below 10° Celsius
\t
• the camera image is mirrorable
\t
• automatic backlight compensation
\t
• automatic brightness and white balance
\t
• TV system: PAL (NTSC available on request)
\t
• anti-fog lotus coating
\t
• focal length: f= 2.8 mm (700TVL) / f=3.6 mm (1080p)
\t
• Sensor coverage: 4.9 mm (H) x 3.7 mm (V)
\t
• Power consumption: < 2.5 W
\t
• No voltage connection necessary at the rear of the vehicle
\t
• Video signal output: 1 Vp-p, 75 Ohm
\t
• Power consumption in operation: 88 mA during the day, 128 mA at night, maximum: 535 mA
\t
• Operating temperature range: -20° C to 70° C, max. relative humidity 95%
\t
• Standing temperature range: -40° C to 80° C, max. relative humidity 95%
\t
• Scanning system: 2:1 interlace 700TVL / progressive 1080p
\t
• Synchronisation: internal
\t
• horizontal synchronisation frequency: 15.63 kHz / 15.73 kHz
\t
• vertical sync frequency: 50 Hz / 60 Hz
\t
• gamma: 0.45
\t
• Gain control: automatic
\t
• signal-to-noise ratio: 48 dB 700TVL / 52 dB 1080p
\t
• Electronic shutter speed: 1/50 (PAL) ~ 1/100,000 s
\t

Device information Monitor:

\t
• 7" AHD LCD monitor with 3 camera inputs.
\t
• Integrated loudspeaker Audio signals from a rear view camera can be played back via loudspeaker
\t
• For all analogue and digital PAL and NTSC cameras also Full HD cameras, 3 HD inputs (720P 25/30Hz, 720P 50/60Hz, 1080P 25/30Hz)
\t
• Resolution: 1024 x 600 pixels
\t
• Operating voltage 9 32 V DC
\t
• rubberised, haptically very pleasant monitor housing
\t
• Metal base with ball-and-socket joints at the top and bottom for optimum horizontal and vertical alignment (vehicle-specific dashboard mounts are optionally available to match)
\t
• 3 inputs for automatically switching on the monitor, e.g. reversing lights, indicators, implements or dashboard switch (reversing light input has priority)
\t
• Guidelines for better distance estimation (can be switched on/off)
\t
• ACC time: delay holding time of the reversing camera image after the signal on the reversing light cable is switched off. Setting options: Off, 1 15 s
\t
• Sleep/timer function: automatic switch-off of the monitor after 0 100 min adjustable in 10-min steps
\t
• Cameras are mirrorable for front/rear or left/right mounting, display of left or right mirror image can be selected in each channel
\t
• Menu languages: English, German, French, Italian, Spanish
\t
• OSD adjustment options for brightness, contrast, colour saturation and volume
\t
• Optionally available adapters for standard pre-installed camera cables of brands such as Orlaco, Dometic, Brigade, Axion, Mekra and Car Guard Systems (also old models)
\t
• Picture format: 16:9
\t
• Brightness: 350 cd/m2
\t
• Picture angle horizontal: left: 70°, right: 70
\t
• Picture angle vertical: top: 50°, bottom: 70°
\t
• Maximum power consumption: 5W
\t
• Operating temperature range: -20°C to 70°C
\t
• Standing temperature range: -30°C to 80°C
\t

Product dimensions and weight Monitor

• Dimensions with sunshade: H: 195mm/ W: 114mm/ D: 55mm
• Weight: 450g

Product dimensions and weight Camera

• Length: 77.9 mm, width: 71.3 mm, height: 70 mm
• Weight: 360g

Logistics and packaging:

\t
• Item number: RUMO7173AB07
\t
• EAN: 4260456386509
\t
• Packaging dimensions: H: 305mm/ W: 202mm/ D: 176mm
\t
• Packaging weight: 2658g

Certificates:

\t
• IP69K waterproof and dust resistance test for the camera (during high pressure/ steam jet cleaning, specific to road vehicles).
\t
• Salt spray test
\t
• ROHS
\t
• CE
\t
• E-Mark

Scope of delivery:

\t
• 1 x monitor (art. no. RUMO7173A)
\t
• 1 x Connection cable harness (art. no. RUERMO7173A-001)
\t
• 1 x Remote control (Art.-No. RUERMO7173A-002)
\t
• 1 x Monitor metal base with 2 ball joints (Art.-No.: RUERMO7232A-001)
\t
• 4 x self-tapping screws
\t
• 1x colour rear view camera
\t
• 1x 20 m extension cable with 4-pin CS screw connectors (Art. No.: RUVKA20)
\t
• 1x rubber sealing plate for the mounting foot
\t
• 1x sealing ring for the cable feed-through
\t
• 6 x screw set for fastening to the vehicle (2x for sheet metal/ 2x for PVC/ 2x with thread)
\t
• 1 x installation and operating instructions